Learn Everything You Can About SeaDek!

What is SeaDek?

SeaDek non-skid, closed cell EVA products offer safe and comfortable alternatives to molded in non-skid, paint-on textures and other marine traction products currently available. Made in the USA from UV protected non-absorbent foam, SeaDek features an innovative, textured micro-dot surface for enhanced non-slip characteristics.

Formulated with an 3M™ acrylic based high-bond pressure sensitive adhesive, SeaDek's robust, peel-and-stick application makes it easy to install and requires no mounting of hardware. Easy to clean and stain resistant, SeaDek also provides protection for boat surfaces, especially in high traffic areas. Other benefits that SeaDek offers include:

  • Exceptional traction even when wet
  • Unparalleled comfort when standing, walking or leaning on boat surfaces
  • Shock absorption, which decreases fatigue
  • Protection for boat surfaces against scratches, chips and dents
  • Noise reduction characteristics - ideal for fishermen

SeaDek can be tailored to fit a wide variety of application on just about any type of boat, including: sports & commercial fishing boats, flats boats, sailboats, ski boats, commercial marine craft, house boats, personal water craft, towboats and more. If you have a boat, you have a place for SeaDek. Additional applications for SeaDek include:

  • Swim platforms and cockpit pads
  • Step kits
  • Helm station pads
  • Poling platforms
  • Coaming bolsters/pads
  • Footwells
  • Gunnels
  • Trailers

JBP Marine Products: Certified SeaDek Fabricators/Installers

JBP Marine Products is one of only a handful of authorized SeaDek fabricators in the world, and the only SeaDek fabricator in Northwest Florida.

JBP Marine Products has been fabricating SeaDek Traction Mats since 2011.

JBP Marine Products is affiliated with JetBoatPilot LLC, a parts and accessories manufacturer located in Bay County Florida, whose primary focus is the manufacture and sale of Jet Boat specific parts and accessories to global Jet Boat industry.


Template Area to be SeaDek'd


Send To JBP For Digitizing/Cutting


Install SeaDek

Once your Custom SeaDek traction mat kit is cut you can opt to install the mats on your boat, kayak, etc.(DIY), or you can choose Certified SeaDek Installation.

DIY: Please watch the SeaDek installation video on this screen for installation instructions.

Pro Installation: If you would prefer to have "Certified SeaDek Installation"you may call 850-960-3236 to arrange a date and time or to locate a "Certified SeaDek Installer" near you. There is an additional charge for professional installation and is billed hourly. For an additional charge installers may also do the installation at your location should your boat not be mobile.


What is SeaDek?

Durable and shock absorbent, SeaDek provides not only an exceptional traction surface but also lessens the fatigue brought on from prolonged standing and working on hard decking and platforms. SeaDek also protects your deck from scratching, chipping and dents. Fishermen will appreciate SeaDek's noise reducing qualities. SeaDek is manufactured in the United States from nonabsorbent, closed cell EVA foam specifically formulated for marine applications. Sports fishing, sailing, ski boats, commercial marine, platforms and steps are just a few of the unlimited applications for SeaDek Non-Skid Marine Traction.

SeaDek's pressure sensitive adhesive backing makes application a breeze. Just measure, cut peel and stick. It's that easy!

How is SeaDek applied?

SeaDek is applied using a pre applied pressure sensitive adhesive (PSA).

Can SeaDek be applied over existing non-skid?

SeaDek adheres very well to most molded-in non-skids and properly applied and maintained aggregate type non-skid paints, as long as the surface is cleaned properly.

What colors are available?

Stock colors are caribbean blue, bimini blue, bahama blue, midnight black, olive green, seafoam green, storm gray, hatteras white, cool gray, beach sand, aqua camo, army camo, snow camo, mica, mocha, camel, faux teak: teak over black, titanium, teak over holly, holly over teak

What is the best method to clean SeaDek?

SeaDek cleans easily with soap, hot water and a stiff brush. A number of household products can be used such as SoftScrub, Simple Green, 409, bleach, etc. Please do not use an acid base cleaner such as MaryKate's Hull Cleaner.

What do I cut SeaDek with?

Use a fresh bladed razor knife. You may have to change blades depending on the size of the job and the amount of cuts made.

Can I get custom cut product?

Yes, if templates or CAD drawings for each part are supplied. If it's a rectangle such as for a helm pad or bolster you can supply dimensions or a sketch.

What is the cost per square foot?

Price is determined by material used and labor time.

What is the largest size I can order?

39"x77" in sheet form.

What is the life expectancy?

Five to seven years. Longer if the boat is stored inside.

Can SeaDek sheets be seamed?

This is not recommended. Even with a very small shrink rate, a small gap between sheets will be present. We recommend leaving a 1/2 inch gap between panels.

Can it be re-adhered if necessary?

Yes, if the edge has slightly come up, use an acrylic based super glue. If the sheet has completely come up, you will have to clean the area thoroughly to remove any existing PSA and reapply another new sheet.

If I choose to remove the pad how do I do this?

Use a plastic putty knife to get under one corner. Grip and pull off. If the EVA seems to be sticking and tearing, use the putty knife to jab the area. You may want to enlist another set of hands to assist. Once the entire pad is removed, there will be a small amount of PSA left on the surface. Soak with mineral spirits for 10 minutes, scrap with the plastic putty knife. Once the PSA has been removed, use acetone to remove the mineral spirits.

How do I prep the surface?

Use an ammonia based window cleaner and a scotch brite pad to remove any dirt, sunscreen, wax. sweat, etc. Scrub well and let dry completely. If the boat is new, you should repeat several times as new boats have mold release that may hinder adhesion.

How do I make patterns for my, swim platform, poling or casting platform, cockpit etc.?

Determine the layout for your particular application. Order a SeaDek template kit. Create your template and submit it to us for a quote and for digitizing to begin production of your pads. These kits include the following: 1, 2 or 3 sheet clear Mylar plastic 40" x 80", 1 indelible marker, 1 data form, 1 template instructions, 1 set of EVA foam color samples. Once you have the kit follow the simple templating instructions. There are also DIY video instructions on the SeaDek website to help you.


2015 Sea Ray 650 Brown Over Black 1991 Sea Ray 380 Sun Sport Faux Teak Brown Over Black 2010 Chaparral 244 Extreme with SeaDek Faux Teak Storm Gray Over Black SeaRay 360 Fly Bridge with Faux Teak Storm Gray Over Black SeaRay 360 Fly Bridge with Faux Teak Storm Gray Over Black Faux Teak Storm Gray Over Black Faux Teak Mocha Over White Faux Teak Mocha Over Black Faux Teak Storm Gray Over Black Faux Teak Storm Gray Over Black Faux Teak Storm Gray Over Black Camel Over Mocha Swim Platform Pads


2016 Yamaha FSH Sport 6mm Two Color W/Border Storm Gray Over Black 2007-2009 Yamaha 230 Series with SeaDek 2 Color Brushed With Border 2007-2009 Yamaha 230 Series with SeaDek 2 Color Brushed With Border SeaDek SeaFoam Green over Storm Gray


Custom Mocha over Black SeaDek mats for a Trojan Cabin Cruiser Two Color Brushed Cockpit Kit Storm Gray Over Black Two Color Brushed Swim Platform Kit Storm Gray Over Black Two Color Brushed Storm Gray Over Black Two Color Brushed Storm Gray Over Black Material: Brushed 6mm, Color: Mocha over Black Material: Brushed 6mm, Color: Mocha over Black Material: Brushed 6mm, Color: Mocha over Black


Material: Embossed 5mm, Color: Mica Material: Embossed 5mm, Color: Mica Material: Embossed 5mm, Color: Mica Material: Brushed 5mm, Color: Storm Gray

Step 1: Choose Your SeaDek's Surface

Click on the Surface you Like!

Embossed Micro Dot
(For Ease Of Cleaning)
(For Maximum Comfort)

Step 2: Choose Your Style

Click on the Style you Like!

Single Color
Two Color
Two Color w/ Border
Faux Teak

Step 3: Choose Your Mat's Thickness

Click on the thickness you need!

  • Superior Anti-Skid
  • No Anti-Fatigue
  • Superior Anti-Skid
  • Minimal Anti-Fatigue
  • Single Color
  • Superior Anti-Skid
  • Minimal Anti-Fatigue
  • Fully Customizable
  • Most Popular Two Color Thickness
  • Superior Anti-Skid
  • Moderate Anti-Fatigue
  • Fully Customizable
  • Superior Anti-Skid
  • Maximum Anti-Fatigue
  • Fully Customizable
  • Most Popular Bolster Thickness

Step 4: Choose Your Mat's Colors

Note: Mat colors do not impact price. However select colors are in stock locally on a regular basis which may reduce fabrication time by as much as two weeks.

Click to Choose Your Top Mat Color

Aqua Camo
Army Camo
Desert Camo
Snow Camo
Bahama Blue
Beach Sand
Bimini Blue
Caribbean Blue
Storm Gray
Midnight Black
Olive Green
Cool Gray
Seafoam Green

Choose Your Bottom Mat Color (optional)

Step 5: Template Options

DIY or Professional Templating

You have the option of templating your boat by purchasing our mylar template kits. Mylar template kits cost $20.00 each and contain enough material to template 67 square feet (3 40"x80" sheets).

Watch the video to the right to determine if you'd like to template your boat or have JBP Marine Products do it for you.

For an additional charge, JBP Marine Products can template your boat for you. (Faux Teak requires professional templating)

Step 6: Custom Options

Add Custom Touches To Your SeaDek Kit

Add custom touches to your custom SeaDek kit, such as fish rulers, custom logos, thicker helm station mats and more.

Click on each item that you'd like to add to your custom SeaDek kit and that amount will be added to your estimate at the bottom of the page.

(Call 850-960-3236 If you'd like to add other options that are not listed here)

13MM and 20MM Helm Station Mats help reduce fatigue when standing for long periods of time or operating in rough water

Fish Rulers can be custom made for any location.

Custom Logos can be created using your files or created by our in house design team

Step 7: Installation Options

DIY or Professional Installation

Once your Custom SeaDek traction mat kit is cut you can opt to have JBP Marine Products install them on your boat, kayak, etc., or you can opt to have Certified SeaDek Installation in select areas, or you can do it yourself (DIY).

Watch the video to the right to determine whether or not you'd like to install your SeaDek kit or have us do it.

JBP Marine Products strongly suggests that you opt for professional installation if you've selected a Faux Teak kit.

Choose Your Installation Option

Step 8: Estimate Square Footage

Enter Your Square Footage

Measure your boat's floor area in sections and add up each area's approximate square footage. Once you have a total estimated square footage enter that number to the right and click ESTIMATE.

Your Custom SeaDek Estimate will appear below in the Total Estimate Window. Bear in mind that this is merely an estimate and complete templates will determine your boat's actual square footage.

If you are satisfied with this estimate and are ready to proceed with your Custom SeaDek purchase please call 850-960-3236.


Total Estimate
(Excludes FL Tax and No tax on out of state orders)

Send Us Your Estimate!

E-mail us your estimate if you're interested in ordering this custom SeaDek Kit

Leave this field empty

Need Help with Square Footage?

SeaDek Products

Helm Station Pads

Cooler Pads

Tumbler Grips

Fish Rulers

Miscellaneous SeaDek Products

SeaDek Sheets

Hobie Kayak Pads










Chris Craft



Cruisers Yachts




Freedom Hawk


Jackson Kyak

Lifetime Kokanee


Native Watercraft

Old Town


Wilderness Systems