SeaDek Installation and Usage

How to Template

If your boat is not found in our products section then likely your SeaDek pads will have to be created from a template. You have the option to create your own templates (see video below) or opt for Pro Templating from a certified installer near you.

DIY: Please watch the SeaDek Temaplate Video on this screen for instructions on how to create proper templates. Template Kits may be purchased by calling JBP Marine 850-867-1410.

If you would prefer to have "Certified SeaDek Templating", you may call 850-960-3236 to arrange a date and time or to locate a "Certified SeaDek Installer" near you. There is an additional charge for professional templating and is billed hourly. For an additional charge JBP Marine may also do the templating at your location should your boat not be mobile.




How to Install

Once your Custom SeaDek traction mat kit is cut you can opt to install the mats on your boat, kayak, etc.(DIY), or you can choose Certified SeaDek Installation.

Pro Installation: If you would prefer to have "Certified SeaDek Installation" you may call 850-960-3236 to arrange a date and time or to locate a "Certified SeaDek Installer" near you. There is an additional charge for professional installation and is billed hourly. For an additional charge installers may also do the installation at your location should your boat not be mobile.

DIY: Please watch the SeaDek installation video on this screen for installation instructions.





How to use SeaDek Dry-fit

Please follow the instructions contained within this Dry-Fit video to help minimize lead times and to help us create the best quality SeaDek pads possible for your boat.





How to Clean

SeaDek can be cleaned with virtually any household cleaners such as soap and a stiff bristle brush, Windex, Simple Green, 50/50 dilution Bleach and Water, Purple Power, 409. For light cleaning use Windex and a white cloth. To remove grease use Purple Power. Avoid using acid based cleaners such as MaryKate's Hull Cleaner.